Sort Lists - Gallagher HR4 Manual Del Usuario

3E3020 Gallagher HR4 Hand Held EID Tag Reader User Manual

Sort Lists

A sort list contains a list of animal IDs, each with a sor ng
assignment. This assignment may be used to separate animals into
predefi ned groups, or to fl ag specifi c animals for selec on.
The Sort Lists screen shows all the sor ng lists available on the
reader. These lists are imported from APS.
To view a sort list
1. From the Main Menu, select Sort Lists and
OK
press
HR4 display.
2. To view the contents of a sort list, select a
list and press
A list of groups that make up the sort list
display.
If sort colours have been set up with
groups in APS, then the group colour will
be displayed behind the group number.
The number of tags scanned into each
group is displayed next to the group name.
• To view the sorted animal IDs within a
group, select the group to be viewed
and press OK.
• A list of animal IDs (VID or EID as set in
the Tag Display screen) are shown.
3. Press the
the sort list and again to return to the Main
Menu.
Note: The sort list 'Empty List' is the factory
default and contains no animals. This can be
used to assign sort groups to each animal as it
is scanned, rather than from a predefi ned list.
Sort lists are compiled or edited in APS then downloaded to the
reader. Changes made to a list will be eff ec ve for all sessions that
use the list a er the change is made.
12
. The sort lists available on the
OK
.
Return
key once to go back to