Connec Ng The Hr4 To A Computer; Care And Maintenance - Gallagher HR4 Manual Del Usuario

3E3020 Gallagher HR4 Hand Held EID Tag Reader User Manual
CONNECTING THE HR4 TO A
COMPUTER
In order to view or alter advanced se ngs on the HR4, you need
to establish a connec on between the HR4 and a PC/laptop that
has APS so ware installed.
• Plug the USB cable supplied with the HR4 into the Hand Held
Reader.
• Plug the other end of the cable into a USB COM port on your
computer.
• Turn on the Reader.
• Use your APS so ware to confi gure advanced se ngs.
See the APS User Guide APS User Guide for further details.
Note: Se ngs can also be updated using a WiFi connec on.

CARE AND MAINTENANCE

The Gallagher HR4 Hand Held EID Tag Reader is a tough and
reliable product designed for use in typical livestock environments.
However, proper care and maintenance can extend the Reader's
life.
Listed below are guidelines for keeping the Reader in good
condi on.
• For op mal ba ery life, Gallagher recommends that you store
the Reader in a cool, dry area (10 to 30 ° Celsius) inside the
supplied hard case and out of direct sunlight.
• A er use, clean the Reader with a damp cloth. Take care not to
scratch the display.
• Recharge the ba eries a er use and before storing for
extended periods.
• Ensure the dust cap is pushed onto the USB cable connector on
the reader a er charging to prevent dirt and dust entering the
connector.
21