Sony NAV-U Serie Guia De Inicio Rapido página 9

To detach the unit from the cradle
1
Holding the unit, press the RELEASE
button of the cradle.
R E L E
A S E
The unit pops out of the cradle.
2
Take the unit out of the cradle.
About the installation on the
dashboard
Note
The adhesive tape is difficult to remove once applied,
and the screw will mark the dashboard. Choose a
position carefully before installation.
1
Choose a position to attach the
mounting plate on the dashboard, then
clean and dry the surface of the
dashboard.
2
Remove the cover of the adhesive
tape, then firmly press down the
mounting plate on the dashboard.
C H G
3
Secure the supplied 3 screws of the
mounting plate using a screwdriver.
Mounting plate
Adhesive tape
1
2
continue to next page t
9