Description Of Symbols - Silverline 128891 Manual De Instrucciones

GB
Introduction
Thank you for purchasing this Silverline tool. This manual contains information necessary
for safe and effective operation of this product. This product has unique features and, even if
you are familiar with similar products, it is necessary to read this manual carefully to ensure
you fully understand the instructions. Ensure all users of the tool read and fully understand
this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about the
product or instructions on its use.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Wear head protection.
Wear hand protection.
Read instruction manual.
Caution!
WARNING: Moving parts can cause crush and cut injuries
WARNING: Sharp blades or teeth!
Do not touch the blades before the machine is disconnected
from the supply and the blades have come to a complete stop
Toxic fumes or gases!
Always disconnect from the power supply when adjusting, changing accessories,
cleaning, carrying out maintenance and when not in use!
Indoors use only
Class II construction (double insulated for additional protection)
T3.15A
Internal time-lag fuse with rated current 3.15A
Conforms to relevant legislation and safety standards
Environmental Protection Waste electrical products should not be disposed of with
household waste. Please recycle where facilities exist. Check with your local authority
or retailer for recycling advice
4
Original Instructions
Technical Abbreviations Key
V
~, AC
A, mA
n
0
n
opm
°
Hz
,DC
W, kW
/min or min
-1
rpm
dB(A)
m/s
2
Ø
Specification
Input voltage: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230–240V~ 50/60Hz
Power: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 710W
Ingress protection: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .IP20
No load speed: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17,000rpm
Max Cuts per minute: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34,000cpm
Blades:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 reversible blades 82mm standard
Planing width: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82mm
Depth of cut range: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0–2mm
Depth adjustment:. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5mm
Left or right chip exit: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Right
Bevelling V-grooves: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Dimensions (L x W x H):. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280 x 160 x 160mm
Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2.8kg
As part of our ongoing product development, specifications of
Silverline products may alter without notice.
Sound and vibration information:
Sound pressure L : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91dB(A)
PA
Sound power L : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102dB(A)
WA
Uncertainty K: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3dB(A)
Weighted vibration a :. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.4m/s
h
Uncertainty K: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5m/s
The sound intensity level for the operator may exceed 85dB(A)
and sound protection measures are necessary.
Volts
Alternating current
Ampere
No load speed
Rated speed
Orbits or oscillations per minute
Degrees
Hertz
Direct current
Watt, kilowatt
Operations per minute
Revolutions per minute
Decibel sound level (A weighted)
Metres per second squared
(vibration magnitude)
Diameter
2
2