Improper Function; Rotating Bezel - Seiko coutura SSC745 Manual De Instrucciones

IMPROPER FUNCTION

When an abnormal display appears, follow the procedures below to reset the
built-in IC. The watch will resume its normal operation.
<HOW TO RESET THE IC>
1. P u l l o u t t h e c r o w n t o t h e
second click.
2. Keep pressing down Button A
and B for 3 seconds or longer.
3. Push the crown back into the
normal position and check if
the small second hand moves
as normal.
Resetting the IC will initialize the watch. Before starting to use the watch, it will
be necessary to set the time and adjust the STOPWATCH hands to the 0 position.
Refer to "TIME SETTING AND HAND POSITION ADJUSTMENT" (P.11) section of
this manual.
28
ROTATING BEZEL (for models with rotating bezel)
The rotating bezel can show up to 60 minutes of elapsed time.
l
1
A
2
CROWN
B
Note: For some models, the rotating bezel rotates only counterclockwise.
Turn the rotating bezel to align
its " " mark with the minute
hand.
Read the numb er on the rot ating
bezel that the minute hand points to.
Elapsed time
Start
30 minutes
have elapsed.
29