HOW TO USE THE STOPWATCH
l The stopwatch can measure up to 60 minutes in 1/5-second increments.
When the measurement reaches 60 minutes, the stopwatch automatically
stops.
l Split time measurement is available.
STOPWATCH 1/5-second
hand
STOPWATCH minute hand
I Before using the stopwatch, be sure to check that the crown is set at the normal
position and that the position of each hand is at the preliminary position.
•
If the STOPWATCH hands do not return to the 0 position when the stopwatch is reset to "0,"
follow the procedure in "TIME SETTING AND HAND POSITION ADJUSTMENT." (P.11)
•
While the second hand is moving at 2-second intervals, the stopwatch cannot be activated. This
is not a malfunction. See "ENERGY DEPLETION FOREWARNING FUNCTION" (P.26) and "HOW
TO CHARGE AND START THE WATCH." (P.21)
18
A
B
<How to reset the stopwatch>
While the STOPWATCH hands are moving
1. Press Button A to stop the stopwatch.
2. Press Button B to reset the stopwatch.
While the STOPWATCH hands are stopped
One of the following s topwatch operations has been made. Reset the
stopwatch accordingly.
[When the stopwatch is stopped]
1. Press Button B to reset the stopwatch.
[When the split time measurement is displayed while the stopwatch is
measuring]
1. Press Button B to release the split time display. The stopwatch hands
move quickly, and then indicate the measurement in progress.
2. Press Button A to stop the stopwatch.
3. Press Button B to reset the stopwatch.
[When the split time measurement is displayed and the stopwatch is
stopped]
1. Press Button B to release the split time display. The stopwatch hands
move quickly, and then stop.
2. Press Button B to reset the stopwatch.
19