Mitsubishi Electric MSZ-FH06NA Manual De Instrucciones página 11

Ocultar thumbs Ver también para MSZ-FH06NA:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

W
EEKLY TIMER OPERATION
• A maximum of 4 ON or OFF timers can be set for individual days of the week.
• A maximum of 28 ON or OFF timers can be set for a week.
E.g. : Runs at 75°F (24°C) from waking up to leaving home, and runs at
81°F (27°C) from getting home to going to bed on weekdays.
Runs at 81°F (27°C) from waking up late to going bed early on
weekends.
Setting1
Setting2
Mon
ON
OFF
75°F (24°C)
Fri
AM 6:00
AM 8:30
Setting1
Sat
ON
Sun
AM 8:00
Note:
The simple ON/OFF timer setting is available while the weekly timer is on. In
this case, the ON/OFF timer has priority over the weekly timer; the weekly timer
operation will start again after the simple ON/OFF timer is complete.
Setting the weekly timer
* Make sure that the current time and day are set correctly.
1
Press
to enter the weekly timer setting mode.
2
Press
and
Pressing
selects the day of
the week to be set.
* All days can be selected.
Setting3
Setting4
ON
OFF
81°F (27°C)
PM 5:30
PM 10:00
Setting2
OFF
81°F (27°C)
PM 9:00
*
blinks.
to select setting day and number
E.g. : [Mon Tue ... Sun]
and [1] are selected.
Pressing
selects
the setting number.
3
Press
,
temperature.
Pressing
selects ON/OFF timer.
Pressing
deletes timer setting.
* Hold down the button to change the time quickly.
* The temperature can be set between 61°F and 88°F (16°C and 31°C) at
weekly timer.
Press
and
other days and/or numbers.
4
Press
to complete and transmit the weekly timer
setting.
Note:
• Press
to transmit the setting information of weekly timer to the indoor
unit. Point the remote controller toward the indoor unit for 3 seconds.
• When setting the timer for more than one day of the week or one number,
does not have to be pressed per each setting. Press
ter all the settings are complete. All the weekly timer settings will be saved.
• Press
to enter the weekly timer setting mode, and press and hold
for 5 seconds to erase all weekly timer settings. Point the remote
controller toward the indoor unit.
5
Press
to turn the weekly timer ON. (
* When the weekly timer is ON, the day of the week whose timer setting
is complete, will light.
Press
again to turn the weekly timer OFF. (
goes out.)
Note:
The saved settings will not be cleared when the weekly timer is turned OFF.
Checking weekly timer setting
.
1
Press
to enter the weekly timer setting mode.
*
blinks.
2
Press
or
day or number.
Press
to exit the weekly timer setting.
Note:
When all days of the week are selected to view the settings and a different set-
ting is included among them,
, and
to set ON/OFF, time, and
E.g. : [ON], [AM 6:00]
and [75°F
(24°C)] are
selected.
Pressing
Pressing
adjusts the time.
adjusts the tem-
perature.
to continue setting the timer for
*
which was blink-
ing goes out, and the
current time will be
displayed.
lights.)
to view the setting of the particular
will be displayed.
once af-
En-10

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Msz-fh09naMsz-fh12naMsz-fh15naMsz-fh18naMsz-fh18na2

Tabla de contenido