Cleaning And Maintenance - Saivod VT-70 Manual Del Usuario

ASSEMBLY INSTRUCTIONS
Do not operate the tower fan without the base assemblies attached to the bottom of the unit. Otherwise
it may cause a hazard.
1. Turn the tower fan upside down for ease of assembly.
2. Press the two halves of the base together and let the power cord through the base.
3. Put the base on the bottom of appliance , then rotate clockwise to fix them together.
4. Secure using the screws provided.
OPERATING INSTRUCTION
GB
Please combine symbols on control panel to understand operation way.
Set the fan on a dry, level and stable surface before using the fan, and then connect the power cord to
the mains.
1. Rotate the switch clockwise from 0 to 3 choose fan mode, adjust position of 1 for low speed, 2 for med
speed, 3 for high speed.
2.If you want to enlarge cooling area in your room, press OSC button, the tower fan will oscillate
automatically and cool your room in larger scope. If you wish to stop oscillation, press the same button
again.
NOTE: Do not force knob beyond its normal stop position.

CLEANING AND MAINTENANCE

Follow these instructions and safety care for your fan. Please remember:
Always unplug the fan before cleaning or assembly.
Do not allow water to drip on or into the fan motor housing.
15
VT-70.indd 15 1/10/2017 11:23:48 AM