TOPDON ITC629 Manual Del Usuario página 10

3.2 Emissivity Setting
The product is provided with 4 types of object
measurement modes:
Coarse object (0.95)
Semi-shiny object (0.60)
According to the characteristics of the measured
objects, users may set the emissivity value through
the "self-define" option (please refer to the table of
"emissivity of common materials").
The operating step is as the following:
16
Semi-matte object (0.85)
Shiny object (0.30)
1) Press "MENU" and select "emissivity" option and press
" "to enter.
2) Press "▲" and "▼"to select the emissivity. Then press
"ENTER" key to determine selection of the emissivity.
3) Press " " or "BACK" toto return.
Note: If you select "self-defined" emissivity, press the
"ENTER" to enter the editing state. Press " " / " " to select
the number to be changed, press "▲" "▼"to change the
value. After the modification is completed, press "ENTER"
to confirm.
17