TOPDON ITC629 Manual Del Usuario página 8

1.2 Calibration of Image Overlapping
1) Press the "MENU" and select "Image Calibration".
2) Press the "ENTER" to enter the image overlap
adjustment mode.
3) Press the navigation keys (up, down, left and right
buttons) to perform the visible image shift operation.
4) Press the "BACK" to exit the image blending mode
(If there is no operation for more than 6 seconds, it will
automatically exit the image blending mode).
2. "Color Palette" Sub-menu
2.1 Color Palette Description
The palette can be used to change the pseudo-color
display of the infrared image on the display. The
palette is divided into: rainbow, iron red, cool, white hot,
black hot. These palettes work best with high thermal
contrast and provide additional color contrast between
high and low temperatures.
Suitable selection of color palette displays the details
of the target objective better. Rainbow, iron oxide red
12
and cold color palettes focus on display of color, which
are very suitable for high heat contrast and are used to
improve the color contrast between high temperature
and low temperature. But the black & white and white &
black color palettes display even linear color.
The following is the image of the same object with
different color palettes.
Rainbow Iron oxide red
Black heat White heat
Cold color
13