Cautions
Please use the original adapter of the company to charge
the product.
If the product has water condensation inside, please power
it off immediately.
Pull off the adapter on the power socket when charging is
finished.
If the product has water condensation inside, please power
it off immediately.
28
FAQ
Q: How long it takes to charger?
A: ITC629 should be charged for two hours at least every
three months for longer battery lifespan.
Q: Can this camera work in a total darkness?Will its
performance be affected by environment light?
A: Infrared Thermographic Camera is used for detecting
infrared radiation from object which won't be affect by the
strength of any visible light. It performs in darkness as
well as under sunshine.
Q: Why the temperature I get from the camera is far below the
real data it should be?
A: Different material and same material with different surface
may be different in IR emissivity. To adjust the IR emissivity
according to the table in our manual is important so that
you would be able to get the most accurate temperature results.
Q: Why I can see 2 images not align with each other?
A: When you are in IR-VL mode, the visible light image and
infrared rays image are all on the monitor. You may
need to calibrate the image while the detecting distance is
29