TEFAL BL935E38 Manual De Instrucciones página 5

CAUTION: Hard foods may mark the inside of the jug but this does not affect
the efficiency of the appliance.
Frozen foods must be smaller than a walnut.
Do not add hot liquid above 80°C as it can be ejected out of the appliance due
to a sudden build up of steam.
AFTER USING YOUR APPLIANCE
• Press on the power button and unplug the appliance.
• Empty the preparation, the jug is not meant for storing food in the refrigerator or
freezer.
• To clean the motor unit, use a damp cloth. Dry it carefully.
• Never immerse the motor unit in water.
• For easy cleaning, wash the removable parts in water with few drops of washing-up
liquid, immediately after use.
• The jug, lid and measuring cap can be cleaned in the dishwasher, but the gasket
must not go in the dishwasher.
• Frequent cleaning in a dishwasher risks damaging the surface of the jug.
• For easy cleaning, you can use the "Clean program" :
Put 150ml of water and 1 drop washing up liquid in the jug. The blender works at
various alternating speeds for approx. 1 min 30.
WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ?
Problems
Appliance does not work
The appliance stopped
while in use
Causes
The plug is not connected.
The blender jug is not positioned
correctly on the motor unit.
The power switch is on OFF
position.
In case of software bug.
Overload
The silicon gasket is missing or
not correctly positioned.
Solutions
Connect the appliance to a
socket with the same voltage as
indicated on the rating plate of
the appliance.
Check that the blender jug is
positioned properly on the motor
unit as explained in the
instructions.
Follow the instructions for
starting your appliance.
Unplug the appliance, wait few
minutes and plug in again.
Follow the instructions in section
Overload.
Place the silicone gasket correctly
on the motor unit.
EN
7