Uline SHOP-VAC H-8096 Mantenimiento De Rutina

H-8096
SHOP-VAC WET/DRY
®
VACUUM
DAILY
1. Filter – Check cartridge filter or foam sleeve for
clogs or heavy soiling and replace if necessary.
Ensure that correct filters are being used for the task
– see Filters section of instruction manual.
2. Collection Bag – If using collection filter bag, check
to ensure that there are no rips or tears in the bag
and that the bag is not full.
3. Tank – If vacuuming up wet or damp material,
empty the tank after use, as musty odors may occur
if debris is left inside.
4. Extension Cord and Plug – Check extension cord
and plug for any cuts or damage. If damaged,
replace motor housing unit.
5. Motor – If there are unusual sounds or if poor
performance occurs, the motor should be inspected
immediately by the Uline service team.
PAGE 1 OF 3
1-800-295-5510
uline.com
ROUTINE MAINTENANCE
WEEKLY
1. Wands/Tools – Inspect wands and tool attachments
for any damage. Replace if necessary.
2. Hose – Inspect hose for any damage and replace if
necessary.
MONTHLY
1. Cleaning – Inspect and clean all areas of the
vacuum, including the inside of the tank.
Para Español, vea página 2.
Pour le français, consulter la page 3.
0621 RH-8096