Kit Assembly; Double Din Radio Provision; Stacked Iso Din Radio Provision - Metra 95-3304 Instrucciones De Instalación

Double DIN radio provision

1. Slide the appropriate bracket into
the trim plate aligning the holes in
the trim plate to the clips on the
bracket. (Figure A)
2. Slide the DDIN radio unit into the
trim plate bracket assembly and
secure the unit to the kit using the
screws supplied with the head
unit. (Figure B)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
4. Reassemble dash in reverse order
of disassembly.

Kit Assembly 95-3304

(Figure A)
(Figure B)

Stacked ISO DIN radio provision

1. Slide the appropriate bracket into
the trim plate aligning the holes in
the trim plate to the clips on the
bracket. (Figure A)
2. Slide the stacked ISO DIN units into
the trim plate bracket assembly
and secure the unit to the kit using
the screws supplied with the head
unit. (Figure B)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
4. Reassemble dash in reverse order
of disassembly.
4
(Figure A)
(Figure B)