Tabla de contenido
Publicidad
4
Application/Use
4.1
Intended use
4.2
Improper use
Installation and operating instructions Wilo-EMU TR/TRE 216 ... 326-3
Application/Use
CAUTION
Total damage due to moisture penetration
Moisture ingress in the connection cable damages the connection cable and the mixer!
Never immerse the end of the connection cable in a fluid and firmly seal it during storage.
ƒ
Securely position the mixer horizontally on a firm bearing surface.
ƒ
Secure the mixer against falling over and slipping!
ƒ
Do not set the mixer down on the propeller. In the case of larger propeller diameters, en-
sure an appropriate platform is provided.
CAUTION! Material damage! Propeller and shaft can be damaged!
ƒ
Store the mixer for a maximum of one year. Contact customer service before storing the
device for more than one year.
ƒ
Storage conditions:
–
Maximum: -15 to +60 °C (5 to 140 °F), max. humidity: 90 %, non-condensing.
–
Recommended: 5 to 25 °C (41 to 77 °F), relative humidity: 40 to 50 %.
–
Protect the mixer from direct exposure to sunlight. Extreme heat can cause damage!
ƒ
Do not store the mixer in rooms in which welding is carried out. The resulting gases or ra-
diation could corrode the elastomer parts and coatings.
ƒ
Protect connection cable against kinking and damage. Observe the bend radius!
ƒ
Turn the propeller at regular intervals (twice a year). This prevents jamming of the bear-
ings and it renews the film of lubrication on the mechanical seal. NOTICE! Wear protec-
tive gloves!
For homogenization and flow generation in commercial areas of:
ƒ
Process sewage
ƒ
Sewage containing feces
Comply with the dimensioning based on the operator requirements! Any other use deviating
from this is regarded as non-compliant with the intended use.
The mixers must not be used in:
ƒ
Drinking water
ƒ
Non-Newtonian fluids
ƒ
Severely contaminated fluids containing hard components such as stone, wood, metals,
etc.
ƒ
Highly flammable and explosive fluids in pure form
en-US
13
Publicidad
Capítulos
Tabla de contenido
