5.7
Scope of delivery
5.8
Accessories
6
Installation and electrical con-
nection
6.1
Personnel qualifications
6.2
Operator's obligations
6.3
Installation methods
6.4
Installation
Installation and operating instructions Wilo-EMU TR/TRE 216 ... 326-3
Installation and electrical connection
16
x10 = stator pack length in mm
Ex
With Ex approval
ƒ
Submersible mixer with connection cable
ƒ
Propeller hub
ƒ
Propeller blade
ƒ
Accessories attached, depending on the installation type
ƒ
Installation and operating instructions
ƒ
Lowering device
ƒ
Auxiliary lifting device
ƒ
Cable bollard to secure the hoist rope
ƒ
Additional rope anchoring
ƒ
Fixation sets with anchor bolts
ƒ
Electrical work: qualified electrician
Someone with suitable technical training, knowledge and experience who can identify
and avoid the dangers associated with electricity.
ƒ
Installation/dismantling work: trained sewage technology professional
Fixation to different construction parts, lifting equipment, wastewater facility basics
ƒ
Lifting work: trained professional for operating lifting devices
Lifting equipment, lifting gear, attachment points
ƒ
Observe locally applicable accident prevention and safety regulations.
ƒ
Observe all regulations for working with and underneath heavy suspended loads.
ƒ
Provide protective equipment. Ensure that personnel wear the protective equipment.
ƒ
Demarcate the working area.
ƒ
Unauthorized persons must be kept away from the working area.
ƒ
If the weather conditions (e.g. ice formation, strong wind) mean it is no longer possible to
work safely, stop all work.
ƒ
Observe the local regulations of sewage technology for the operation of sewage systems.
ƒ
To allow the product to be fixed securely and functionally, the structural components
and foundations must be of sufficient stability. The operator is responsible for the provi-
sion and suitability of the structural components and foundations!
ƒ
Check that the available consulting documents (installation plans, installation site, inflow
conditions) are complete and correct.
ƒ
Flexible installation with lowering device as stand unit
DANGER
Danger due to fluids hazardous to health during installation!
Ensure that the installation site is clean and disinfected during installation. If contact
with fluids that are hazardous to health is possible, observe the following points:
• Wear protective equipment:
⇒ Closed safety goggles
⇒ Face mask
⇒ Protective gloves
• Wipe up drips immediately.
• Observe information from the work regulations!
en-US
19