RADIO RECEPTION
PRESETTING STATIONS
The unit can store a total of 32 preset stations. Presetting allows
you to tune in to a station directly. Stations are assigned preset
numbers, beginning from 1 in consecutive order for each band
(FM, MW, LW).
Automatic presetting:
This unit has a function for reception of *
System) and other stations.
FM RDS stations take priority over other FM stations if there are
more than 32 receivable stations.
Manual presetting:
You can select stations to be preset from all the bands.
AUTOMATIC PRESETTING
The tuner scans through the receivable frequency range and
stores stations automatically.
1 Press TUNER BAND.
FM is displayed.
2 Keep pressing RT for 4 seconds until AUTO
PRESET is displayed.
a SET flashes for 4 seconds.
3 Press a SET while a
The tuner searches for a station, beginning with the FM band.
When a tuned station is stored, the selected preset number
flashes on the display.
The search continues on the MW and LW bands if preset
numbers are still available.
When automatic presetting has been completed, the display
returns to the first preset station.
When the tuner detects *
alternative frequencies
Only the station with the stronger signal is stored.
Before storing an RDS station, the tuner checks first whether
the same stations on the other frequencies are present, and
stores the station with the best reception.
When automatic presetting is done, all previously stored stations
are cleared.
10
ENGLISH
1
RDS (Radio Data
a flashes.
a
a
a
2
identical RDS stations with
MANUAL PRESETTING
1 Press TUNER BAND repeatedly to select the band.
FM
2 Press f DOWN or g UP to select a station.
Each time the button is pressed, the frequency changes.
a When tuning in to an FM RDS station
After TUNE on the display goes out, the Program Service
3
station name (*
PS) is displayed and RDS lights up.
The Program Service
station name (PS)
b When tuning in to the other stations
After TUNE on the display goes out, the band is displayed.
• During FM stereo reception, 1 lights.
3 Press a SET to store the station.
The selected preset number flashes.
4 Repeat steps 1 to 3 to store the stations.
The next station will not be stored if a total of 32 preset stations
for all the bands have already been stored.
To search for a station quickly with f DOWN or g
UP (Auto Search)
Keep one of the buttons pressed until the tuner starts searching
for a station. The search stops when the tuner tunes in to a station.
To stop the Auto Search manually, press one of the buttons.
• The Auto Search may not stop at stations with very weak signals.
"FULL" is displayed if you attempt to store more than 32 preset
stations.
MW
LW
RDS