Remote Control - Aiwa NSX-BL56 Manual De Instrucciones

3 3
3 3 3
Connect the supplied antennas.
Connect the FM antenna to FM 75 Ω terminal and the MW/
LW antenna to MW/LW LOOP terminals.
MW/LW antenna
4
Connect the AC cord to an AC outlet.
The DEMO will begin when the AC cord is plugged into an
AC outlet for the first time. To deactivate the DEMO, set the
clock.
• Do not leave objects generating magnetism, such as credit
cards, near the speakers, as these objects may be damaged.
• Do not bring the FM antenna near metal objects or curtain rails.
• Do not bring the MW/LW antenna near other optional
equipment, the stereo system itself, the AC cord or speaker
cords, since noise will be picked up.
• Do not unwind the MW/LW antenna wire.
To position the antennas
FM unipolar antenna:
Extend fully and position for the best possible reception.
This antenna is of an instant type, so the use of an outdoor antenna
is recommended.
MW/LW antenna:
Position and rotate this antenna to find the best possible
reception.
To stand the MW/LW antenna on a surface
Fix the claw to the slot.
CONNECTING AN OUTDOOR ANTENNA
For better FM reception, use of an outdoor antenna is
recommended.
Connect the outdoor antenna to FM 75 Ω terminal.
To connect other optional equipment

REMOTE CONTROL

FM antenna
Inserting batteries
Detach the battery cover on the rear of the remote control and
insert two R6 (size AA) batteries.
When to replace the batteries
The maximum operational distance between the remote control
and the sensor on the main unit should be approximately 5 meters
(16 feet). When this distance decreases, replace the batteries
with new ones.
To use SHIFT on the remote control
Buttons 1 have two different functions. One of these functions
is indicated on the button, and the other on the plate above the
button.
To use the function on the button, simply press the button.
To use the function on the plate above the button, press the button
while pressing SHIFT.
To use FUNCTION on the remote control
FUNCTION substitutes for the function buttons (TAPE DECK 1/
2, TUNER BAND, VIDEO/AUX, CD) on the main unit.
Each time FUNCTION is pressed, the next function is selected
cyclically. When tapes are inserted in both decks, each deck is
selected with FUNCTION.
c/d PRESET on the remote control
The function is the same as that of d
• If the remote control is not going to be used for an extended
period of time, remove the batteries to prevent possible
electrolyte leakage.
• The remote control may not operate correctly when:
- The line of sight between the remote control and the remote
- Other remote controls are used nearby (those of a television,
page 23.
O O O O O
sensor inside the display window is exposed to intense light,
such as direct sunlight.
etc.).
d on the main unit. d d
d
5
ENGLISH
En