SOMFY Home KEEPER Manual Del Usuario página 14

To change my user codes
2
User codes 1 and 2 allow you to:
arm and disarm the system,
➔ ➔
customise the user code 1, the SOS codes, the installer code,
➔ ➔
store 2 SMS numbers and 2 numbers for voice alert,
➔ ➔
change the date and time.
➔ ➔
FR
To access the settings menus (offline mode):
DE
Press +
1 1 1 1
➔ ➔
IT
Enter the user code 1 (default: 1111), press the key
➔ ➔
EN
To change the user code 1:
Go to the menu by typing
➔ ➔
EL
namely 1111, is displayed.
ES
Enter the new code. It must be between 0001 and 9998, for example:
➔ ➔
+
4 0 0 1
PT
To change the phone numbers
3
Go to the menu by typing
➔ ➔
receiving an alarm SMS
Enter the phone number, for example:
➔ ➔
0 0 X X 7 6 0 9 6 4 8 1 2
The number is stored (XX = country code, e.g. 44 for UK).
Follow the same procedure for the voice alert number, menu
➔ ➔
Make sure you inform the recipients of the alert messages, and that their phone
number has been stored.
To use my Home Keeper alarm
4
Fully arming the alarm
Press .
➔ ➔
Enter user code 1 or place
➔ ➔
the badge on the reception area:
You will hear 2 long BEEPs.
3 short BEEPs indicate a fault.
In online mode, if you forget to arm the alarm when you leave your home, a
notification will prompt you to arm the alarm via a smartphone, if the function has
been activated.
(default user code 1)
+
1 0 1 0
4 0 0 1 The new user code 1 is stored.
➔
+
1 0 1 1
+
➔
.
1 1 1 1 The default user code 1,
➔
to store the phone number of user 1 for
0 0 X X 7 6 0 9 6 4 8 1 2
1 0 1 2
➔
-
+
OR