Maintenance And Service; Maintenance And Cleaning; After-Sales Service And Customer Assistance - Bosch PLR 25 Manual Original

OBJ_DOKU-27422-001.fm Page 22 Thursday, July 14, 2011 11:09 AM
22 | English
The measuring tool monitors the correct function for each
measurement. When a defect is determined, only the symbol
shown aside flashes in the display. In this case, or when the
above mentioned corrective measures cannot correct an er-
ror, have the measuring tool checked by an after-sales service
agent for Bosch power tools.
Accuracy Check of the Measuring Tool
The accuracy of the measuring tool can be checked as follows:
– Select a permanently unchangeable measuring section with a length of ap-
prox. 3 to 10 metres; its length must be precisely known (e.g. the width of a
room or a door opening). The measuring distance must be indoors; the target
surface for the measurement must be smooth and reflect well.
– Measure the distance 10 times after another.
The deviation of the individual measurements from the mean value must not ex-
ceed ±3 mm (max.). Log the measurements, so that you can compare their ac-
curacy at a later point of time.

Maintenance and Service

Maintenance and Cleaning

Store and transport the measuring tool only in the supplied protective pouch.
Keep the measuring tool clean at all times.
Do not immerse the measuring tool in water or other fluids.
Wipe off debris using a moist and soft cloth. Do not use any cleaning agents or
solvents.
Maintain the reception lens 17 in particular, with the same care as required for
eye glasses or the lens of a camera.
If the measuring tool should fail despite the care taken in manufacturing and test-
ing procedures, repair should be carried out by an authorised after-sales service
centre for Bosch power tools. Do not open the measuring tool yourself.
In all correspondence and spare parts orders, please always include the 10-digit
article number given on the type plate of the measuring tool.
In case of repairs, send in the measuring tool packed in its protective pouch 21.

After-sales Service and Customer Assistance

Our after-sales service responds to your questions concerning maintenance and
repair of your product as well as spare parts. Exploded views and information on
spare parts can also be found under:
www.bosch-pt.com
Our customer service representatives can answer your questions concerning
possible applications and adjustment of products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
2 609 140 620 | (14.7.11) Bosch Power Tools