Electrical Connection; Disposal And Recycling; Storage - Scheppach BG200AL Traducción De La Instrucción De Original

Service information
Please note that the following parts of this product are
subject to normal or natural wear and that the following
parts are therefore also required for use as consuma-
bles.
Wear parts*: grinding medium, Carbon brushes, sharp-
ening wheel, angle gauge, v-belt
* Not necessarily included in the scope of delivery!

10. Electrical connection

The installed electric motor is factory connected ready
for operation. The connection meets the applicable
VDE and DlN regulations.
The connection made by the customer as well as any
extension cables used must comply with all relevant
regulations.
Connection and repair work on the elctric equip-
ment must be carried out by a qualified technician
only.
MPORTANT NOTE
The motor rating is S 1. This means that when overload-
ed it switches off automatically. After a cooling period
(can vary) you may switch it on again.
INITIAL OPERATION
Before initial operation regard the following points:
• Turn machine on with the main switch. Wait until
grinding wheel has reached its operational speed
before starting to work.
• Press the work piece firmly to the work rest and move
it from one side to the other slowly and constantly on
the grinding wheel.
• Grinding may slow down the wheels. Reduce pres-
sure on the work piece until the wheel regain their
speed.
IMPORTANT NOTE:
• Hold on to small work pieces with a pair of pliers or
similar tool.
• Never grind on the side of the wheels!
• As most materials gain heat while being grinded
please be careful with the work piece.

11. Disposal and recycling

The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip-
ment and its accessories are made of various types of
material, such as metal and plastic. Never place de-
fective equipment in your household refuse The equip-
ment should be taken to a suitable collection center for
proper disposal. If you do not know the whereabouts
of such a collection point, you should ask in your local
council offices.

12. Storage

Store the equipment and accessories out of children's
reach in a dark and dry place at above freezing temper-
ature. The ideal storage temperature is between 5 and
30 °C. Store the electric tool in its original packaging.
GB 19