Features • Two channel power amplifi er • 90 watts into 2 ohms load • 60 watts into 4 ohms load • TO3P transistor on amplifi er stage • Variable 18/12dB/oct Low-High-Band pass x-over • Multiplayer x10 Frequency cutting • Adjustable x-over from 30Hz to 600Hz (x1), 300Hz to 6000Hz (x10) •...
Página 5
Crossover setting (Eng) Select “FLAT” for a compleate frequency range. Flat switch (FR) Choisissez “FLAT” pour une gamme de fréquence de compleate. (IT) Selezionare “FLAT” per una completa risposta in frequenza. (D) Wählen Sie “FLAT” für einen compleate Frequenzbereich vor. (SP) Seleccione “FLAT”...
Página 6
Speakers connection � � � ���� � ���� � � ����� (Eng) Minimal acceptable Impedance 2 ohm. To adhere itself to the illustrations for the connections. (FR) Impédance acceptable minimale 2 ohms. Pour s’adhérer aux illustrations pour les raccordements. (IT) Minima Impedenza accettabile 2 ohm. Attenersi alle illustrazioni per i collegamenti (D) Minimaler annehmbarer Widerstand 2 Ohm.
Power connection ���� �� �������� ������ CAR CHASSIS CAR CHASSIS (Eng) Connect the Positive (+12V) directly to the Battery of the car. To make sure itself to insert a fuse of adequate amperage in order protect the system. Connect the Ground in to the car chassis, close as possible to the amplifi er. (FR) Reliez le positif (+12V) directement à...
Página 8
Input setting (Eng) Connect the output Audio coming from the car radio, in to the Low level input of the amplifi er. Low Level Input (FR) Relier l’output Audio provenant de l’autoradio, au input Low level de l’amplifi cateur. (IT) Collegare l’uscita Audio proveniente dall’autoradio, all’ingresso Low level dell’amplifi catore. (D) Das Ausgang Audiokommen von vom Autoradio anschließen, das niedrige Niveau des Verstärkers einzugeben.