Kinetico Water Systems K5 Manual De Instrucciones página 44

INSTALLATION GUIDE
10
STEP 7 - Filter installation
Before you begin: Ensure the cold water valve is shut off and there is no pressure in
the system. Carbon (green caps with clear netting) and Claryum
blue netting) filter cartridges will come pre-installed in their cartridge sumps.
1
Attach carbon sump to the First Stage
position on the inlet side of the System
Manifold. Ensure all connection points
are aligned and push the top of the
sump up and into the System Manifold.
Turn the sump towards the right until
it locks.
NEED HELP? GIVE US A CALL 877.333.7108
®
2
Repeat step 1 for the Second Stage RO
Membrane that fits in the center, and
®
for the Claryum
Stage position on the outlet side of the
System Manifold.
(green caps with
cartridge in the Third