Ryobi CSD42L Manual De Utilización página 4

GB
FR DE ES
GENERAL POWER TOOL SAFETY WARNINGS
Q
Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring or its own cord.
Fasteners contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give the
operator an electric shock.
DESCRIPTION
1. Rotation selector (Forward/Reverse/Center lock)
2. Switch trigger
3. LED worklight
4. Speedload +™ System
5. Torque adjustment ring
6. Two-speed gear selector (HI-LO)
7. Battery cap
8. Battery cap retainer
9. Battery pack
10. To lock
11. To unlock
12. Reverse
13. Forward
14. HI Speed
15. LO Speed
16. Bit
17. Rubber collar
18. Load bit
19. Release bit
20. To increase torque
21. To decrease torque
SPECIFICATIONS
Voltage
Clutch
Switch
No load speed(Screwdriver mode):
Max. Torque
Weight
Battery pack
Charger
OPERATION
WARNING
Do not allow familiarity with products to make
you careless. Remember that a careless fraction
of a second is sufficient to inflict serious injury.
WARNING
Always wear eye protection marked to comply
with ANSI Z87.1. Failure to do so could result in
objects being thrown into your eyes resulting in
possible serious injury.
IT NL PT DK SE
4 V
24 Positions
On-Off/Reversible
0-200/0-600 min
5.1 Nm
0.49 Kg
AP4001
AP4700
FI NO RU PL CZ
English
WARNING
Do not use any attachments or accessories
not recommended by the manufacturer of this
product. The use of attachments or accessories
not recommended can result in serious personal
injury.
APPLICATIONS
You may use this product for the purposes listed below:
Q
Driving screws with screwdriver bits
Q
Light-duty drilling
WARNING
Battery products are always in operating
condition. Therefore, the switch should always be
locked when not in use or carrying at your side.
BATTERY PROTECTION FEATURES
Ryobi 4 V lithium-ion batteries are designed with features
that protect the lithium-ion cells and maximize battery life.
If the tool stops during use, release the trigger to reset
and resume operation. If the tool still does not work, the
battery needs to be recharged.
TO INSTALL / REMOVE BATTERY PACK
See Figure 2.
WARNING
Always remove battery pack from the product
when you are assembling parts, making
adjustments, cleaning, or when not in use.
Removing battery pack will prevent accidental
starting that could cause serious personal injury.
Q
Detach the cap by twisting the arrow toward the
UNLOCK icon.
-1
Q
Insert the battery pack in the direction shown. Make
sure the raised rib on the battery pack aligns with the
groove in the battery port. Press down on the battery
pack to be sure contacts on the battery pack engage
properly.
Q
Reattach the cap by placing it over the battery pack
and twisting the arrow to the LOCK icon, making sure
the cap is secure.
Q
To remove the battery pack, twist the cap to open and
remove the battery pack from the battery port.
Q
Do not attempt to use this tool if the battery cap is not
closed and locked.
1
HU RO LV LT EE HR SI SK GR TR