Descargar Imprimir esta página

Gima BL1 Manual Del Usuario página 5

Ocultar thumbs Ver también para BL1:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
Electronic Digital Thermometer adopts scientific technology of microcomputer. It breaks through the traditional
disadvantages of the mercury thermometer of mercury pollution and inconvenient reading with features of fast
measurement, safety and simply operation.
Specification
Measuring Range: 32.0°C~43.9°C (90°F~111°F)
Measuring time:
Accuracy:
Display:
Battery:
Battery life:
Weight:
Thermometric sensor
How to use
1) Please make sure the environment temperature is between 16°C to 31°C before use.
2) Press power switch, the screen shows the full segment with a sound of "Bi",
which indicates sufficient power.
3) Memory function: After the full segment, the last measured value with the letter
of "Last memory" are displayed.
4) After 2S, it will displays "Lo°C" or "Lo°F". Then the symbol "°C" or "°F" will flash. Please wait for
the "°C" or "°F" to flash 3 times before taking measurement.
5) A buzzing tone will be heard for about 3 seconds which means the finish of measurement.
a. Normal alarm: sound of "bibi.........bibi.........bibi........." with green backlight 5 seconds means normal
temperature that below 37.6°C/99.7°F.
b. Fever alarm: Sound of "bibibibi...bibibibi...bibibibi..."with red backlight 5 seconds means fever that
the temperature is above 37.6°C/99.7°F.
6) During measurement: LCD will display "Lo°C" or "Lo°F" if the measured temperature is below 32.0°C (90°F),
or will display "Hi°C" or "Hi°F" if the measures temperature is above 43.9°C/111°F.
7) Turn off the unit by just slightly pressing power switch, or leave it for a few minutes, it will auto-off to save power.
8) When it is used to measure children temperature, close supervision shall be provided by an adult.
9) To maintain the accuracy of each measurement, please wait for at least 3 minutes before another measurement
is taken.
10) How to change "°C" to "°F": Press switch to turn on and hold it, until displays "Lo°C" (no flash), then release
the switch within 2S and press it again, you can change the temperature unit from °C to °F or back.
About 10 seconds
±0.1°C (±0.2°F) for 35.0~41.0°C (95°F~105.8°F) & ±0.2°C
(±0.4°F) for remaining range at an ambient of 22°C (71.6°F)
31/2 LCD digits (Unit of display: 0.1°C/0.1°F)
CR2032 lithium
About 1000 times
27g
LCD display
Switch
ENGLISH
Full segment

Publicidad

loading