Technical Data; Specified Conditions Of Use; Emergency Procedure - Gude STS 710 Traducción Del Manual De Instrucciones Original

Technical Data

Jigsaw
Art. No
Service connection
Rated input
Stroke rate under no-load
Lengths of stroke
Bevel cuts up to
Cutting depth Wood
max. in:
Steel plate
Weight net / gross
Noise details
Sound pressure level L
1)
pA
Sound power level L
WA
Measured according to EN 60745; Uncertainty K =
3 dB (A)
Wear ear protectors!
Vibration details
Total vibration values (triaxial vector sum) Deter-
mined properly EN 60745:
cutting boards:
Vibration emission value a
h,B
cutting sheet metal:
Vibration emission value a
h,M
Uncertainty K = 1,5 m/s
2
WARNING: The vibration emission level will vary
because of the ways in which a power tool can be
used and may increase above the level given in this
information sheet.
The vibration emission level may be used to compare
one tool with another.
It may be used for a preliminary assessment of
exposure.
An accurate estimate of the vibratory load
should also take into account the times when the
tool is shut down or when it is running but not
actually in use. This may significantly reduce the
vibratory load over the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration such
as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
STS 710
control elements and how to use the appliance
58217
properly. Abide by all the safety measures stated in
the service manual. Act responsibly toward third
230 V ~ 50 Hz
parties.
710 W
The operator is responsible for accidents or risks to
800 - 3000 min
-1
third parties.
Persons over 16 years of age can only work on the
18 mm
appliance. An exception includes youngsters trained
45 °
in order to reach knowledge under supervision
80 mm of the trainer during occupational education.
In case of any doubts about connection and operati-
8 mm
on refer please to our customer center
2,1 kg / 2,3 kg

Specified Conditions Of Use

92 dB(A)
This jig saw is intended to cut wood, plastic and
103 dB(A)
metal; it can cut straight lines, bevels, curves, and
internal cut-outs.
Do not use this product in any other way as stated
for normal use. Not observing general regulations
in force and instructions from this manual does not
make the manufacturer liable for damages.

Emergency procedure

8,693 m/s²
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
8,478 m/s²
harm and calm them down. If you seek help, state the
following pieces of information:: 1. Accident site, 2.
Accident type, 3. Number of injured persons, 4. Injury
type(s)
Symbols
Read and understand the operating
instructions before using the
appliance. Familiarise with the
WARNING / Caution!
Read the operating instructions to reduce
the risk of injury.
Wear eye protective goggles !
Wear ear protectors!
Wear a suitable dust protection mask.
Wear gloves!
Unplug the machine before any work
on it.
ENGLISH
13