Performing A Reset - Kärcher Senso Timer ST6 eco!ogic Manual De Instrucciones

1
.
Ok
1
2
. .
30

Performing a reset

 Remove the sensor cap of the sensor.
 Remove the battery clip from the battery.
2
.
 Remove the battery from the battery compartment
 Insert the battery into the battery compartment in
 Hold down the OK button until the hour settings
 Connect sensors with the control unit as described
of the control unit.
the correct position (+/- marking).
are flashing in the display.
in Chapter "Preparation / Teaching sensor".
– 14
EN