Ryobi RY906500S Manual Del Usuario

CO SENSOR SPECIFIC SAFETY RULES
 NEVER ignore an automatic shutoff event. IF AUTOMATIC
SHUTOFF OCCURS – YOU MUST leave the area imme-
diately and relocate to an open outdoor area. Ventilate
the area thoroughly before occupying again. Ensure the
generator is located in an open, outdoor area. Always
point exhaust away from occupied structures. Never
run the generator in enclosed areas (e.g. not in a house
or garage). Failure to follow these instructions can lead
to carbon monoxide (CO) poisoning which can result in
death or serious personal injury.
 The carbon monoxide sensor on this generator is not
designed to detect smoke, fire, or any other gas. It will
only activate due to the presence of carbon monoxide
SAFETY LABELS
These additional safety labels are located on your generator. If any of the labels come off
the unit or become hard to read, contact customer service or a qualified service center for
replacement.
CARBON MONOXIDE (CO) SENSOR
In the event of a carbon monoxide hazard, the LED on the CO
sensor will flash red and the generator will shut off. Leave the area
immediately and relocate to an open outdoor area. Ventilate the
area thoroughly before occupying again. Ensure the generator is
located in an open, outdoor area. Always point exhaust away from
occupied structures. Never run the generator in enclosed areas
(e.g. not in a house or garage).
DO NOT tamper with, adjust, or modify the carbon monoxide (CO)
sensor module on your generator.
CO SENSOR ADDENDUM
RY906500S
This generator includes a carbon monoxide sensor. In addition to all the rules, warn-
ings, and instructions contained in your generator operator's manual, please also read
and understand the information included in this CO sensor addendum. If you loan
someone this product, loan them this addendum also.
CARBON MONOXIDE SENSOR WITH AUTOMATIC SHUTOFF
The generator's carbon monoxide sensor is designed to monitor the level of carbon
monoxide present during generator operation. If the generator is positioned incor-
rectly and carbon monoxide levels rise to an unsafe level, the LED on the sensor will
flash red and the generator will automatically shut down. Leave the area immediately
and relocate to an open outdoor area. Ventilate the area thoroughly before occupying
again. Ensure the generator is located in an open, outdoor area and point exhaust
away from occupied structures before restarting.
NOTE: After a shutoff event has occured, the LED will continue to flash red for up to
20 minutes. Once the generator is relocated and CO levels are safe, the generator
can be restarted even if the light is still flashing.
 The carbon monoxide shutoff feature on this generator
 DO NOT tamper with, adjust, or modify the carbon mon-
SYMBOLS
gas at the sensor. Carbon monoxide gas may be present
in other areas.
is not a substitute for safe generator practices. Always
operate the generator in open, outdoor areas, at least
20 feet away from occupied structures. Never operate the
generator in fully or partly enclosed areas or near open
windows, doors, or other unventilated spaces.
oxide (CO) sensor module on your generator. Failure to
follow these instructions can cause the monitor to mal-
function which can result in death or serious personal
injury.