GRAPHITE 59G370 Manual De Instrucciones página 16

TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CAUTION: BEFORE USING THE POWER TOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
Use the power tool only when included guard is installed. Guard must be securely fitted to power
tool and adjusted to guarantee the best possible safety level, which means that cutting blade
part facing operator must be shielded as much as possible. The guard must protect the operator
against splinters and accidental contact with cutting blade.
Use only diamond cutting blades. Possibility of equipment installation in the power tool alone does
not guarantee safe use.
Maximum permissible rotary speed of a working tool must not be lower than maximum rotary
speed specified for the power tool. Working tool that exceeds permissible rotary speed may crack
and part of it may splinter.
Use diamond cutting blades only for tasks they are designed for. For example, never grind with
side surface of a cutting disc. Cutting discs are designed to remove material with disc edge. Applying
side force may break disc of this type.
Always use undamaged fixing flanges with size matching to cutting disc or blade. Proper flanges
support cutting blade and reduce risk of breaking.
Outer diameter and thickness of working tool must match to power tool dimensions. Working
tools with incorrect dimensions may be insufficiently shielded or controlled.
Discs, blades, pads, flanges and other equipment must exactly match to spindle of the power
tool. Working tools that do not match precisely to power tool spindle rotate unevenly, produce hard
vibrations and may cause loss of control over the power tool.
Do not use damaged working tools under any circumstances. Check working tools for cracks
and dents before each use. In case of dropping power tool or working tool, make sure it is not
damaged or use other, undamaged tool.
Once the working tool has been checked and installed, start the power tool and allow it to work
for one minute at maximum speed. Make sure that user and bystanders stay away from range
of the rotating working tool. Damaged tools usually break during this test.
Wear personal protection equipment. Depending on the task, use protective mask that shields
whole face, eye protection or safety glasses. When necessary use anti-dust mask, hearing
protectors, work gloves or special apron that protects against small particles of grinding and
grinded material. Protect eyes against particles produced at work and floating in the air. Anti-dust
mask and respiratory protection must filter dust produced at work. Prolonged exposure to noise may
lead to hearing loss.
Make sure to keep bystanders at safe distance from the power tool range. Each person close to
operating power tool must use personal protection equipment. Splinters of processed piece or
cracked working tool can chip off and cause damage also beyond direct range.
Whenever power tool can hit hidden electric wires or its own power cord during operation, hold
it only by insulated handle. When in contact with live wires all metal parts of the power tool are live
too, this may cause electric shock of the operator.
Keep power cord away from rotating working tools. Loss of control over the power tool can lead to
cutting or catching the power cord, also hand or whole arm can get into rotating work tool.
Never put away the power tool before working tool comes to complete stop. Rotating tool can
contact the surface it is put on, which can cause loss of control over the power tool.
Do not carry power tool when it is rotating. Accidental contact of rotating working tool with clothes
may cause its catching and plunging of working tool into operator's body.
Clean ventilation holes of the power tool on regular basis. Motor blower sucks dust into casing and
large depositions of metal dust may cause electric hazards.
WALL CHASER
59G370
DETAILED SAFETY REGULATIONS
16