GRAPHITE 59G370 Manual De Instrucciones página 18

Explanation of used symbols
1 2
1. Read instruction manual, observe warnings and safety conditions therein
2. Device with class II insulation.
3. Use personal protection measures (protective goggles, earmuff protectors, anti-dust mask)
4. Disconnect the power cord before starting maintenance or servicing.
5. Keep the tool away from children.
6. Protect against rain.
CONSTRUCTION AND USE
Wall chaser is a hand-held power tool driven by single-phase commutator motor with insulation class II.
The power tool is designed for cutting and making chases in walls, floors etc. in materials like concrete,
stone, brick etc. without use of water.
The wall chaser is equipped with system that allows connecting external dust extraction, e.g. industrial
vacuum cleaner, which should be operating during work.
Range of use covers repair and building works, and any work from the range of individual, amateur activities
(tinkering).
Use the power tool according to the manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1. Front handle
2. Handle
3. Adaptor
4. Dust extraction outlet
5. Cutting blades shield
6. Cutting blade
7. Base locking knob
8. Base
9. Switch
10. Switch lock lever
11. Spindle lock button
12. Guiding roller
13. Nut
14. Screws
15. Outer flange
* Differences may appear between the product and drawing.
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY/SETTINGS
INFORMATION
3 4 5
18
6