Cleaning The Vacuum Cleaning Robot; Cleaning The Power Brush - Samsung SR8730 Manual Del Usuario

CLEANING THE VACUUM CLEANING ROBOT

Cleaning the Power Brush

You must turn off the Power Switch at the bottom of the
main unit before cleaning the robotic vacuum.
• Because the dust in the dust bin may come out, separate the
dust bin fi rst before cleaning the power brush.
CAUTION
1. Separate the dust bin by pressing the Dust Bin Eject (PUSH)
button.
2. After checking whether there are any foreign substances,
press the hook that is fi xing the brush cover to separate it.
3. Lift the power brush up from the main unit.
4. Remove any foreign substances such as long hairs or strings
wrapped around the power brush using a cleaning brush or a
vacuum cleaner.
5. When cleaning is complete, fi x the Power Switch side of the
power brush fi rst and then fi x the other side of the brush in the
same way.
32_ maintain tools and fi lters