Adjusting The Clearance Between The Doors - Samsung RS263B Serie Manual De Propietario E Instalación

DA99-01278A(0.4)EN1 2007.12.6 11:41 AM 페이지25 in

ADJUSTING THE CLEARANCE BETWEEN THE DOORS

NOTE
If the door of the freezer is lower than that of the
refrigerator.
Adjustment part
Please open the doors and adjust them as follows:
1) Release the nut (①) on the lower hinge until it reaches the upper end of the bolt (➁).
NOTE
➀ NUT
2) Please adjust the height difference between the doors by turning the bolt (➁) clockwise (
clockwise (
NOTE
➀ NUT
3) After adjusting the doors, turn the nut clockwise (
tighten the bolt again with the wrench (➂) to fix the nut(①).
➀ NUT
NOTE
Adjust Leveling first.
Making small adjustments between doors.
When you release the nut (①), use enclosed hex wrench (➂) to turn the bolt(➁) in a slightly
counterclockwise direction. This will enable you to loosen the nut(①) with your fingers.
➂ WRENCH
➁ BOLT
).
When you turn clockwise (
➂ WRENCH
➁ BOLT
➂ WRENCH
➁ BOLT
If you do not fix the nut ( ① )firmly, the bolt ( ➁ ) may be released.
If the door of freezer is higher than that of the
refrigerator.
), the door goes up.
) until it reaches the lower end of the bolt, then
25
Adjustment part
➂ WRENCH
➀ NUT
➁ BOLT
) or counter
➂ WRENCH
➀ NUT
➁ BOLT
➂ WRENCH
➀ NUT
➁ BOLT