to adjust the zoom FactoR oR Focus
1.
Loosen the front cover as shown.
2.
Loosen the zoom/focus lever slightly.
3.
Position the zoom/focus lever to WIDE (NEAR) or TELE (FAR) as appropriate.
4.
Then, tighten the zoom/focus lever to fix the adjusted position.
5.
Turn the front cover to tighten it.
Front cover
To ensure seamless waterproofing, tighten up the front cover by turning it to the end.
J
When fixing the front cover, ensure that the triangle of the main body faces the triangle of the
front cover.
Use the lever to adjust the zoom factor or focus, and turn the lever clockwise to fix it.
Before you can adjust the zoom factor/focus of the lens, loosen and remove the front cover.
Zoom Lever
WIDE ↔ TELE
Focus Lever
FAR ↔ NEAR
English _