Getting Started - Dune HD Duo 4K Manual De Instrucciones

ENGLISH
• SEARCH — access the search / time search functions.
• MOUSE — toggle virtual mouse (if available).
• 0–9 — enter numbers and text; control some other player functions.
• CLEAR — delete the last entered character, delete the currently selected
item, control some other player functions.
• SELECT — switch text input mode, add the item to the selection list, control
some other player functions.
• A (Red), B (Green), C (Yellow), D (Blue) — control various player functions.
Installation
Ensure there is enough space around the player for proper cooling. The space
at each side should be not less than 10 cm. When installing the player in an
enclosed cabinet, please ensure proper airflow and cooling inside the cabinet.
When installing the player in a hidden location, such as enclosed cabinet, you
can use the IR extender cable to allow the infrared signal from the remote
control to reach the player.

Getting Started

Ensure the RC has batteries installed.
Connect the player to your TV and to other A/V equipment in an appropriate
way. Use HDMI connection to get the best possible quality of video and audio.
Make sure to switch off the player and all relevant A/V equipment before
connecting them. Ensure your TV and other A/V equipment are configured to
use proper inputs. Connect the power cord to the player and switch the player
on using the power switch on the back panel of the player.
The player will perform its initial loading procedure, which may take up to about
1 minute. During the loading procedure, «DUNE HD» logo is shown on the TV
screen.
If you do not see «DUNE HD» logo on the TV screen when you switch on the
player, it may mean some problem with the connection between the player and
the TV or that a wrong video input is chosen in the TV or A/V receiver/switch.
In this case, recheck the cables and the settings of the TV or A/V receiver/
switch, or try to use different cables or a different way of connecting the player
to the TV.
9