Uline DOWNTOWN H-9207 Manual De Instrucciones página 2

2. Insert adjustable glide into foot of each leg.
(See Figure 2)
Figure 2
Adjustable
Glide
3. For L-desk return assembly, slide support frame over
leg connector and attach using four M6 x 12 mm
bolts. Repeat for second leg connector.
(See Figure 3)
Figure 3
PAGE 2 OF 21
DESK ASSEMBLY CONTINUED
4. Insert adjustable glide into foot of each leg.
M6 x 12 mm
Bolt
Allen
Wrench
(See Figure 4)
Figure 4
5. Align holes of assembled L-Desk return over holes on
desk frame and attach using two M6 x 15 mm bolts.
Repeat for second set of holes. (See Figure 5)
NOTE: Diagram shows right-hand L-Desk
configuration. For left-hand L-Desk configuration,
attach return frame to opposite side.
Figure 5
M6 x 15 mm
Bolt
Adjustable
Glide
0321 IH-9207