Uline DOWNTOWN H-9207 Manual De Instrucciones página 7

PARTS
Cabinet x 1
NOTE: Overhead cabinet is compatible with
62" H panels only.
NOTE: Assemble unit on a smooth, non-marring
surface to prevent scratching. Check that all parts
are included.
1. Remove pre-attached handle from inside of cabinet
door by removing the screws. Move handle to
outside of cabinet door. Attach using the same
screws. Repeat for second door. (See Figure 17)
Figure 17
PAGE 7 OF 21
OVERHEAD CABINET ASSEMBLY PARTS
Bracket x 1
OVERHEAD CABINET ASSEMBLY
1-800-295-5510
uline.com
M3.5 x 16 mm Screw x 8
2. Align bracket with pre-drilled holes behind cabinet
and attach using eight M3.5 x 16 mm screws.
(See Figure 18)
Figure 18
3. Place bracket over top of panel to attach.
(See Figure 19)
Figure 19
Key (Set of 2) x 1
0321 IH-9207