Publicidad
Idiomas disponibles
Idiomas disponibles
Figure 15
13. Connect one panel to the universal connector
post by sliding clip A into clip B. Repeat to connect
second panel to create wall. (See Figure 16)
Repeat Steps 4-6 of Panel Assembly to attach the
second L-Desk.
Figure 16
PAGE 6 OF 21
PANEL ASSEMBLY CONTINUED
Attach clip B to top and
bottom pre-drilled holes in
universal connector post.
2-Person L-Desk kit is now fully assembled.
Completed
Assembly
NOTE: If attaching multiple workstations for
a longer run, repeat the steps above, as
necessary. Steps include removing aluminum
trim on the universal connector posts,
attaching clip B and connecting panels.
0321 IH-9207
Publicidad
