List Of Spare Parts - Kettler COACH E Instrucciones De Montaje

GB
sible technically talented.
The fastening material required for each assembly step is
■
shown in the diagram inset. Use the fastening material exactly
as instructed.
Bolt all the parts together loosely at first, and check that they
■
have been assembled correctly. Tighten the locknuts by hand
until resistance is felt, then use spanner to finally tighten nuts
Handling the equipment
Before using the equipment for exercise, check carefully to en-
■
sure that it has been correctly assembled.
It is not recommended to use or store the apparatus in a damp
■
room as this may cause it to rust. Please ensure that no part of
the machine comes in contact with liquids (drinks, perspiration
etc.). This may cause corrosion.
The machine is designed for use by adults and children should
■
not be allowed to play with it. Children at play behave unpre-
dictably and dangerous situations may occur for which the ma-
nufacturer cannot be held liable. If, in spite of this, children are
allowed to use the equipment, ensure that they are instructed
in its proper use and supervised accordingly.
This Rowing machine is an exercise machine that works de-
■
pendent from stroke sequence (speed).
The training device has a magnetic brake system.
■
To operate correctly, the pulse function requires a minimum vol-
■
tage of 2,7 volts (only for computers working with batteries).
List of spare parts page 34-36
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the pro-
duct (see handling).
Example order: Art. no. 07975-160 / spare-part no. 94317661/
2 pieces / S/N .................... Please keep original packaging of
this article, so that it may be used for transport at a later date, if
necessary.
Goods may only be returned after prior arrangement and in (in-
ternal) packaging, which is safe for transportation, in the original
box if possible. It is important to provide a detailed defect des-
cription / damage report!
Important: spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this should
be clearly stated on the order by adding the words „with fastening
material".
completely against resistance (locking device). Then check that
all screw connections have been tightened firmly. Attention:
once locknuts have been unscrewed they no longer function
correctly (the locking device is destroyed), and must be repla-
ced.
For technical reasons, we reserve the right to carry out preli-
■
minary assembly work (e.g. addition of tubing plugs).
Before beginning your first training session, familiarize yourself
■
thoroughly with all the functions and settings of the unit.
Care and Maintenance
Damaged components may endanger your safety or reduce
■
the lifetime of the equipment. For this reason, worn or dama-
ged parts should be replaced immediately and the equipment
taken out of use until this has been done. Use only original
KETTLER spare parts.
To ensure that the safety level is kept to the highest possible
■
standard, determined by its construction, this product should
be serviced regulary (once a year) by specialist retailers.
Use for your regular cleaning, maintenance and care our ap-
■
pliance maintenance set (Article no. 07921-000) specifically
licensed for KETTLER Sports apparatus and available from the
Sport specialized trade.
Please ensure that liquids or perspiration never enter the ma-
■
chine or the electronics.
Waste Disposal
KETTLER products are recyclable. At the end of its use-
ful life please dispose of this article correctly and
safely (local refuse sites).
KETTLER GB Ltd.
GB
Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL
www.kettler.co.uk
KETTLER International Inc.
USA
1355 London Bridge Road
Virginia Beach, VA 23453
www.kettlerusa.com
+44 1527 591901
+44 1527 62423
e-mail: sales@kettler.co.uk
+1 888 253 8853
+1 888 222 9333
e-mail: sales@kettler.co.uk
5