OPERATIONS and ADJUSTMENTS
4
Adjusting or Changing Harness Straps (fig. a):
Harness straps must be through slots at or below
shoulders.
• Press Tab to release metal Rod and lift Rod
out of side Pockets.
• Slide metal Rod out of Loops of harness
straps.
• If necessary to change slots, pull harness
strap out of current Slots and thread through
desired Slots.
IMPORTANT: Straps MUST be through
matching Slots of seat pad and car seat.
• Select Loops that provide proper snugness.
Make sure the Rod is threaded through the
same loop position on both straps.
• Replace metal Rod into side Pockets and
slide Rod down below Tab.
Make sure Tab holds metal Rod secure
20
(continued)
5
Changing Crotch Strap Positions (fig. b):
Buckle tongue must be in slot closest to but
not under child.
• From bottom of car seat, remove crotch
strap Clip.
• From top of car seat, rethread crotch strap
through desired Opening.
• Re-attach crotch strap Clip exactly as
shown.
Pull on buckle to make sure it is held
securely
ly.
.