Using Child Restraint; Positioning Harness Straps - Graco SnugRIDE Click Connect 40 Manual

7.0 Using Child Restraint

7.1 Positioning Harness Straps

FAILURE TO PROPERLY ADJUST THE HARNESS STRAPS FOR
YOUR CHILD INCREASES THE RISK OF SERIOUS INJURY OR
DEATH IN THE EVENT OF A SHARP TURN, SUDDEN STOP, OR
CRASH. The harness straps must be properly adjusted to fit your child
according to the following instructions.
1. Remove child restraint
from base and rotate handle
down to sitting position.
See "5.1 Adjusting Handle" and
"5.2 Removing and Attaching
Child Restraint", page. 23.
2. Place child in seat as shown
3. Determine which head support
position places the harness
straps so they are at or below
your child's shoulders
.
.
35