Adjusting Head Support/Harness Straps - Graco Smart Seat Manual Del Propietário

18.3 Adjusting Head Support/
Harness Straps
increases the risk of serious injury or death
in the event of a sharp turn, sudden stop or
crash.
BEFORE adjusting the head support height,
have your child lean forward slightly.
top of seat and pull head support up until it
snaps into one of the 6 height positions.
and push head support down.
CHECK to make sure it is securely snapped
into one of the 6 height positions by pulling
up on head support.
When using in rear-facing
one of the bottom 3 height positions
When using in forward-facing
use one of the top 4 height positions
Refer to page 50 for harness strap
placement.
Failure to properly
adjust the harness
straps for your child
A
on
mode always use
B
.
mode always
B
.
51 51
A
B