Axis EDGE AX-4330 Manual Del Usuario página 7

adaptor into the bottom socket of the shaver.
* Before connecting the power cord plug from the AC adaptor into the
bottom socket of the shaver, make sure that the socket is completely
dry, to prevent any possible malfunction.
3. Connect the AC adaptor plug into the AC outlet.
* Your shaver will be fully charged in approximately 1 hour, and the
stored power will last approximately one week if the shaver is used for 3
minutes daily.
* While the shaver is recharged, the recharge indicator LED lights up,
indicating the recharging is in process.
* To recharge your shaver, do not use any other power source other than
the AC adaptor included with this shaver.
Recharge indicator LEDs
Axis Edge |12| english
> During recharging: Remains lit.
> After full charge: Goes out.
Notes:*Before recharging the shaver, check that both the plug and the
outlet are securely attached to prevent any possible malfunction.
*While the shaver is recharging, a small continuous noise may be heard
or the shaver body or the AC adaptor may build up and emit some heat.
This is not a malfunction.
After recharging
> After the shaver is recharged
for approximately 1 hour, all the
power reserve indicator LEDs
and the recharge indicator LED
will remain lit up, indicating that
the shaver is fully charged.
Axis Edge |13| english
low
power
battery
switch
LED
indicator