How To Use - Axis POINT AX-0100 Manual Del Usuario

HOW TO USE

1. Remove the cap and slide the power switch to
"ON".
2. Insert the tip of the outer blade gently into the
nostril or ear and more the trimmer slowly around
the opening of the nostril or ear to trim hairs inside
them.
Make sure that you use the trimmer to cut only the
hairs at the entrance of the nostril or ear.
* Do not insert the outer blade into the nostril or
ear beyond its tip. Also do not press the outer
Axis Point |10| English
blade strongly against the side of the nose or ear.
3. After use, slide the power switch to "OFF"
and be sure to replace the cap of the trimmer to
protect the outer blade.
CARE AND MAINTANENCE
Washing in water
* Before washing the trimmer in water, check that
the battery compartment cover is securely fixed to
the body case.
Axis Point |11| English