Cleaning With The Brush - Axis POINT AX-0100 Manual Del Usuario

1. Remove the cap,
slide the power switch
to "OFF" and turn the
outer blade case slowly
counterclockwise to
remove it.
2. Wash the blade in
cold or lukewarm water.
3. Place the trimmer in
an open area to dry it
thoroughly.
Axis Point |12| English
open
outer
blade
case
close
inner
blade
inner
blade driving
ring shaft
body
case
4. Turn the outer blade case clockwise to close the
body case.
* Clean the inner blade with the brush at least once
every three (3) washings in water.

Cleaning with the brush

1. Remove the cap, slide the power switch to
"OFF" and turn the outer blade case slowly coun-
terclockwise to remove it.
2. Pull the inner blade from the driving shaft and
use the accessory brush to clean it.
Axis Point |13| English