Pet Mate CATE MATE Guia De Inicio Rapido

FITTING INSTRUCTIONS AND TEMPLATE
SCHABLONE
D
1
5
1
Place this template in desired position on door and
draw round it. (We recommend the bottom of the hole
is approximately level with your pet's stomach.)
2
Use an electric jig-saw to cut along inside of drawn
line. For screen doors, use scissors or a sharp knife
to cut hole. Be careful to cut hole square to the door,
particularly with thicker doors. Ensure frames are
free-fitting in hole.
3
Position interior frame (frame without swinging flap)
on inside of door and mark four screw positions.
4
Remove frame and drill screw clearance holes in
panel to approximately 5mm (
Pet Mate Ltd. guarantee your product for a period of three years from the date of purchase, subject to proof of purchase date.
The guarantee is limited to any defect arising due to faulty materials or manufacture. Any defective item will be repaired or
replaced free of charge at the manufacturer's discretion, provided that the defect has not been caused by neglect, misuse or
normal wear and tear. Your statutory rights are not affected.
CUSTOMER HELPLINE
GABARIT
F
2
6
0 - 6mm
1
(0 - / ")
4
6 - 13mm
( 1 / - 1 / ")
4 2
3 ⁄ ") diameter.
1 6
3 YEAR LIMITED GUARANTEE
UK : +44 (0) 1932 700 001
USA : (936) 760 4333
PLANTILLA
E
3
7
5
Determine thickness of door panel (t).
6
Select appropriate screw/spacer combination.
7
Position exterior frame on outside of door. Screw
interior frame to it by using appropriate screw/spacer
combination for panel thickness (see Fig. 6). Finally,
fit screw caps.
A helpful tip...
To train your pet to use the cat flap, prop
it open at first and use food as an
encouragement.
www.pet-mate.com
SJABLOON
NL
4
5mm
( 3 / ")
16