AL-KO KE 1800/35 Manual Del Usuario página 14

Avoid touching wire fences, the underground and other
hard materials by a running saw.
If you want to avoid kickbacks, follow these instructions:
Hold the chain saw firmly in both hands.
−
Start cutting when the unit is already running.
−
Never cut using the top of the guide bar.
−
Always watch the end of the guide bar.
−
Never use the chain saw with the stretched arms.
−
Never cut on the ladder or above the shoulder level.
−
Be careful when going on with the started cut.
−
Never work too much leaned to the front.
−
Never cut more brunches at the same time.
−
Always work with the correctly sharpened and tight
−
saw chain.
Release the chain saw out of the cut only when the
−
saw chain is running.
1.2 Safety Symbols on the Unit
WARNING – Be extremely careful.
Read the operating instructions
Wear protective headpiece, protec-
tive glasses and ear defenders
Caution: kickback
Do not use in the rain
Pull mains plug in case of defective
power cord.
GB 2
1.2.1 Oil for saw chains
Oil for saw chains must be carried and stored only in the
containers which are allowed for this purpose and signed.
2 Use Purposes of the Unit
2.1 Determined Usage
This chain saw is designed for infrequent use by home-
owners or gardeners and is intended for such general
applications as:
cutting of sawn timber
−
pruning
−
cutting firewood.
−
It is not intended for professional (industrial) use.
2.2 Spare Parts and Accessory
Only use the original spare parts and original accessory
(see the list of spare parts).