Features; Cyberbike™ Overview; Assembling The Cyberbike; Assembling The Parts - Bigben Interactive Cyberbike Manual De Instrucciones

Ocultar thumbs Ver también para Cyberbike:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 30
1.b. Features:
• Two playing modes: Classic or Remote
• Button programming system
• Handlebar calibration system
• Full Wii™ controls for compatibility with Wii™ games.
• Adjustable pedal resistance
• Forward and reverse pedalling
• Handlebar can be adjusted to four different heights
• Seat can be adjusted to seven different heights
• Front and rear stabilisers
• Maximum weight limit: 130kg.
1.c. Cyberbike™ overview:
(Picture A)

2. ASSEMBLING THE CYBERBIKE™

The Cyberbike™ should only be assembled by an adult. When assembling the bike,
no force should be applied when inserting parts. In case of diffi culty, you should refer
to the assembly diagrams or contact the helpline (see paragraph 7).
2.a. Assembling the parts
Front and rear supports: Turn the Cyberbike™ upside down and attach the feet
as described below. Position the screws and tighten using the assembly tool
provided. (Fig.1)
Seat: Insert the tube supporting the seat into the Cyberbike™ main frame.(fi g.2)
Handlebar: Connect the cable inside the tube before inserting the handle bar
tube into the Cyberbike™ base.
Insert the handlebar tube into the Cyberbike™ main frame as shown. (fi g.3)
Insert the left handle into your handle bars making sure that the screw hole is
correctly positioned underneath. Insert the screw supplied and screw in with
the tool provided or a Phillips screwdriver. Make sure the screw is fully screwed
in before use. (fi g.4)
Pedals: Each pedal is marked as left and right. It is essential that you insert the
correct pedal to each side. Tighten the pedals with the tool provided. (fi g.5)
Insert the AA batteries in the battery compartment
2.b. Connecting the Cyberbike™

Connecting the Cyberbike™

Ensure your Wii™ console is switched off
Check that your handlebar is correctly centred.
Ensure that the Cyberbike™ slide switch is set to either the REMOTE mode (for
the Cyberbike™ game) or CLASSIC(for Mario Kart™ game).
02
FRONT
Fig.1
Fig.2
Fig.3
BACK
Fig.4

Publicidad

Tabla de contenido
loading

Tabla de contenido