AVM FRITZ!DECT 200 Instalación Y Operación página 7

LEDs
LED Condition
off
on
On/Off
fl ashing
fl ashes briefl y
at regular
intervals
on
fl ashing
DECT
fl ashes briefl y
at regular
intervals
Meaning
Socket is switched off .
Socket is switched on.
Firmware update
Depending on the progress of the fi rmward update,
the "DECT" LED fl ashes or turns off .
FRITZ!DECT 200 switched off the integrated socket
because the permitted amperage was exceeded
(see "Technical specifi cations").
FRITZ!DECT 200 is registered with the FRITZ!Box.
Registering with FRITZ!Box.
FRITZ!DECT 200 is not connected to the FRITZ!Box.
FRITZ!DECT is either not registered, or is outside the
FRITZ!Box range.
12
Confi guring Automatic
Switching
Here is how to confi gure automatic swit-
ching:
1. Open the FRITZ!Box user interface
(http://fritz.box).
2. Select "Home Network / Smart Home".
3. Click on behind your FRITZ!DECT
200.
4. Click the "Switch Automatically" tab.
5. Enable the "Automatic switching enab-
led" option.
6. Select the kind of switching and confi gu-
re the automatic switching.
The various types of switching
are described comprehensively
in the online help for the
FRITZ!Box. Click in the
FRITZ!Box user interface.
7. Click "OK" to save the settings.
Unsubscribing
If you would like to register FRITZ!DECT 200
with another FRITZ!Box, de-register it from
the current FRITZ!Box fi rst:
1. Hold the "DECT" button down for at least
6 seconds.
2. FRITZ!DECT 200 is de-registered from
the FRITZ!Box.
3. After a brief delay the "DECT" LED begins
fl ashing.
Now you can register FRITZ!DECT with
another FRITZ!Box.
Removing FRITZ!DECT 200 from the
power outlet does not de-register it
from the FRITZ!Box.
13