Button Function - AVM FRITZ!DECT 200 Instalación Y Operación

Switch the Socket On and Off
The FRITZ!DECT 200 switchable socket can
be switched on and off in various ways:
• with the "On/Off " button
• by mouse click in the FRITZ!Box user
interface on a computer
• with a FRITZ!Fon
• with the MyFRITZ!App
In addition, you can confi gure automatic
switching and control the FRITZ!DECT
200 with a weekly calendar or a Google
calendar.
Even when automatic switching is
enabled, you can turn FRITZ!DECT
200 on and off by hand, on a
computer, with a FRITZ!Fon, or with
MyFRITZ!App.
Switching with a FRITZ!Fon
You can switch FRITZ!DECT 200 on and off
using a FRITZ!Fon:
1. Press the "MENU" key on the FRITZ!Fon.
2. Select "Home Network" and then press
"OK".
3. Select "Smart Home" and then press
"OK".
4. Under "FRITZ! Actuators", select a FRITZ-
DECT device and press "Off " or "On" to
change its status.
The socket is switched off or on.
10
Switching with the
MyFRITZ!App
You can switch FRITZ!DECT 200 on and
off using the MyFRITZ!App: For this the
MyFRITZ!App must be installed on your
smartphone and be connected to the home
network directly or via remote access.
The MyFRITZ!App can be downloaded for
free from the App Store and from Google
Play.
Google Play Store App Store
Buttons
FRITZ!DECT 200 has two buttons with LEDs
(see "LEDs" on page 12).
Button Function
On/Off Switches the socket on/off
Deregister from FRITZ!Box
(press and hold for at least
6 seconds).
Re-register with FRITZ!Box:
DECT
1. Press and hold the button
down for at least 6 seconds
until the LED starts fl ashing.
2. Now press the "DECT" but-
ton on the FRITZ!Box.
11