Remote Control Unit - JVC JX-S555 Manual De Instrucciones

Connectors Controls, and Indicators (Remote Control Unit)

Remote Control Unit

1
POWER button
Press to turn the power ON or OFF.
2
SOURCE SELECT buttons
Press to select an input component.
3
LOOP PROTECT button
Press this button when you don't want the signal selected
by the SOURCE SELECT button to be sent to the corre-
sponding output terminal.
ON: The input (video/audio) signals are not output at an
output terminal having the same number as the in-
put terminal.
OFF: The input (video/audio) signals are output at the out-
put terminal having the same number as the input
terminal.
8
-EN
POWER
1
SOURCE SELECT
DUBBING
LOCK
4
(
MONITOR
SELECT
REMOTE CONTROL UNIT
☞
( p. 11, 13, 15, 17)
☞
( p. 13, 15, 19)
LOOP
PROTECT
)
FOR JX-S555
RM-AJ555
AV SELECTOR
4
DUBBING LOCK button
(MONITOR SELECT)
Press to disable the POWER and LOOP PROTECT button
and fix the circuit output to the output terminals. This but-
ton is useful for preventing accidental or erroneous opera-
tion during dubbing.
• When one of the SOURCE SELECT buttons is pressed
while the DUBBING LOCK is activated, only the VIDEO
output from the MONITOR output is switched without
changing the video signal being dubbed through the
VIDEO output.
2
3
☞
( p. 14, 20)